Skip to content

Accurathrash Class 55 'Deltic' Loksound DCC Sound Decoder

SKU ACC2277
Original price $168.00 - Original price $168.00
Original price
$168.00
$168.00 - $168.00
Current price $168.00
Availability:
in stock, ready to be shipped
LokSound V5 DCC Sound Chip

Designed specifically for the accurascale Class 55 - Deltic locomotive, this decoder works seamlessly with the onboard lighting, PowerPack stay-alive system and dual speaker configuration to reproduce the characteristic sound and function of an Deltic  at work.

Common Features:

  • The LokSound 5 decoder works for analogue DC and AC (!) layouts.The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.

Customer Reviews

Based on 78 reviews
95%
(74)
3%
(2)
1%
(1)
1%
(1)
0%
(0)
P
Paul T.
Deltic Sound

Top notch sound for a top notch loco!

W
Willy G.
A super sound experience

I allready had the Caledonian sleeper with a class 92 loksound 5 build in decoder with allready a high sound performance
The accuratrash class 55 Deltic loksound decoder is a level higher in diesel sound experience

P
Peter W.
faulty model

While looking good the model does not work when fitted with speaker and sound decoder as there is a short

P
Paul D.

Great sound

B
Bryn M.

Sounds great,
Easy to fit the decoder
The big accuthrash speaker really gives a bass rumble from the loco
The Speaker is easy to fit, but the one clip being a bit of a challenge to get the screws in from under the PCB. Not impossible but gently does it once the PCB is prised out

D
D W.
Loco to my ears

GREAT SOUND AND EASY TO FIT WITH AN ACCURATHRASH SPEAKER.WHAT MORE COULD YOU WANT .FITTED IN A ACCURASCALE 55 DELTIC.GREAT STUFF.

A
ALAN B.
D C C SOUND DECODER class 55

At this time have not used this decoder

B
Brian P.
SOUNDS GREAT

I remember the sound of a Deltic ,roaring through Doncaster and Retford on non stop service .This the best that I have heard and was very easy to install.This must be the best R-T-R loco ever made.

C
Chris P.
Absolutely brilliant but room for improvement

Absolutely fantastic sound best deltic sound at the moment we already have 2 Acurascale deltics from the 1st batch and the 3rd sound chip is going in a bachmann that we've had for a while just one problem you still don't seem to have sorted the Drive lock on function 5 yet but apart from that It's Brilliant

N
Nigel B.
Good value for money

If you have a d c c ready deltic get the locomotive sound fantastic sound 👌 👍